Accessories
Application
The Safety Gate can directly be mounted on a post made of square tubing, channels or angle profile. For mounting the Safety Gate onto round tubing you will need some adaptors as you can see onto the enclosed sketch.
Amerplastics has this adaptor-set available for 1-1/4” and 1-1/2” round pipe, resp. 42,3 mm and 48,3 mm. The adaptor-set exists of two galvanized angles and 3 U-bolts with fastening materials. The angles can be mounted on the posts with the U-bolts. We advise to mount the galvanized angles at the outer sides of the handrail posts as drawn on the sketch.
After the adaptor-set has been mounted onto the posts, the safety gate and the support block can be mounted onto the angles. The adaptor-set provides a stable and rigid construction so that the safety gate also can be mounted onto round hand railing.
It might be necessary to order additional length, because the angles are further away from each other. Most times this only means ordering the next larger size.
When you plan to use an adaptor set, you should measure the size of the gate opening from the outside of both round tubing’s. This is because the gate will actually be crossing that length. Generally you will be ordering the next larger size.
Windlock
Others
- Good weather and UV resistance.
- Good chemical resistance.
